Saving...

Saving...

wiki.Alumni.NET - Your Location Information Resource

I love 7th graders and rainbow belts 43

From wiki.Alumni.NET

(Difference between revisions)
Jump to: navigation, search

173.234.127.10 (Talk)
(New page: Image:Contour_Abs_4024.jpg The emergency brakes on your vehicle were originally applied to stop it while the regular brakes failed. However, the brakes on some Honda Prelude no...)
Newer edit →

Revision as of 14:28, 6 May 2011

The emergency brakes on your vehicle were originally applied to stop it while the regular brakes failed. However, the brakes on some Honda Prelude now rarely fail, and the crisis brakes are more often used to retain the automobile from moving while parked. The most frequent source of failure for emergency brakes develops when they aren't employed for some period of time, causing the brake wire to rust and seize.

Directions

things you'll need:

1 Determine which type regarding emergency brakes your Honda Prelude will require. Emergency brakes typically function by activating the regular braking method on the driving wheels. The emergency brakes for the Honda Prelude use the rear wheels, which may well get disc or drum brakes.

2 Drain fifty percent the brake fluid from the master cylinder plus raise the vehicle.

3 Remove the tire and wheel assembly by way of a socket wrench. Remove the brake drum if present. If you have rear disc brakes, disconnect the caliper mounting bolts with a socket wrench and lift the caliper assembly aside from the brake rotor. Postpone the caliper assembly with mechanic's wire so that is it does not pull on the brake flex hose. You may at this point remove the caliper assembly also brake pads.

4 Unfasten the caliper bracket mounting bolts in any socket wrench and remove the caliper bracket from the brake rotor. Remove the rotor retaining screws with a socket wrench plus pull the brake rotor right off the wheel mounting studs.

5 Thread double 8 x 1.25mm bolts between the rotor plus wheel mounting studs with a Phillips screwdriver if the rotor remains seized with place. Tighten the screws pair changes at some time till the brake rotor yous released.

6 Set up the new brake by reversing the removal procedure. You may need to retract the piston into the caliper with a acceptable instrument such as a great C-clamp.

7 Refill the professional cylinder together with fresh brake fluid. Pump the brake pedal to seat the brake pads and guarantee you get a company pedal before driving the vehicle.

Resources. Contour Abs.

Find replacement crisis brakes for your car with JC Whitney.

Print Email Share

Comments



Personal tools